2019/02/13

With the rapid development of 5G and other high-speed communication technologies, the test requirements of related chips or modules are increasing rapidly. At present, RF industry has adopted the solderless connector widely, so as to avoid the scrap of expensive test board due to the failure of connector welding. For example, there is a typical industry application.

Customer use case (image courtesy of an industry user, not a Gwave product)

The six types of end launch connector come out with market requests, and designed by Gwave technical team.  We use 2.92mm interface for 40GHz products, 2.4mm interface for 50GHz products and 1.85mm interface for 65GHz products, and all of them are international standard interface. In addition, the products can be directly compatible with the PCB layout of PCB boards which are manufactured by US or other manufacturers. The electric performance can compete with international brand.

 According to the male and female of the interface, we introduce 6 products as follows:

VSWR test demo board demonstration: the use of 4003 plate transmission line, S parameter measurement:

VSWR test result (2.4mm interface up to 50GHz)

Since its establishment for more than 8 years, Gwave has served many customers in the field of optoelectronics, from universities such as Tsinghua university, Beijing university of posts and telecommunications, to telecommunication companies such as Fiberhome, Huawei, and research institutes such as institute of telecommunications, Chinese academy of posts and telecommunications. Many years of front-line customer service experience has enabled Gwave to have a unique understanding of the demand in the field of optoelectronics. This the welding free series connectors, compared with similar foreign products, are with high cost-effective performance. This is the Gospel of our customers.